RFM-1100C automatic vertical laminating machine is a new type of water-based dry coating and pre-coating machine introduced by our company. It has advanced structure, high degree of automation,simple operation, and elegant appearance. It can be widely used in packaging for books, magazines and commercial applications. It is an ideal equipment for printing plants and post-processing processing.
Process
The height of non-stop feeding can reach 1150mm, pre-stacking device, non-stop feeding
FEEDING UNIT
● 4 suckers for lifting and 4 suckers for conveying structure. Max Speed 12000 sheets/h
● The paper feeding table has upper and lower over-limit protection
● The height of non-stop feeding can reach 1150mm, pre-stacking device, non-stop feeding
CONVEYING TABLE AND OVERLAP
● The conveying table adopts customized stainless steel corrugated board
● The brush wheel and rubber pressing wheel move smoothly
● Servo motor overlap, improve accuracy of lap, error≤±1m
CUTTING UNIT
● The paper cutter is equipped with a tension controller and an anti-curl device to
ensure that the paper is flat and not curled.
● The paper cutting part contains grinding wheel, disc knife and chain knife for slitting,
meeting customers' requirements for slitting films of different materials.
● The bounce roller is controlled by an independent motor, and the paper can be
separated by using the speed difference.
● Hot knife low pressure direct heating and slitting without tail film,
detecting paper thickness and slitting, accurate and efficient
NON-STOP COLLECTOR
● Adopt pneumatic paper sorting structure to ensure the neatness of the paper and
facilitate the next process.
● With a reduction wheel to prevent the paper from being damaged due to too fast
hitting the baffle.
● Counting electric eye, the number of running paper is displayed on the display screen
at the take-up machine, which can be cleared and accumulated.
● Induction electric eye, sensing the length of the paper,
if the length of the paper changes, the belt will accelerate,
and the baffle of the take-up machine will overturn and lift the paper.
Equipment Technical Parameters
| Model |
RFM-1080C |
RFM-1300C |
| Maximum film size |
1080×880mm |
1280×880mm |
| Minimum lamination size |
280×350 |
280×350 |
| Speed |
5-100m/min |
5-100m/min |
| Lamination pressure |
5-15mpa |
5-15mpa |
| Paper size |
128-500g/m2 |
128-500g/m2 |
| Total power |
50kw |
55kw |
| Volume (length × width × height) |
7500mm×2100mm×2800mm |
7500mm×2300mm×2800mm |
| Weight |
7500KG |
8000KG |
Equipment Schematic
Product Features
The appearance of the equipment is painted, and the process and structure have been changed,
making it more beautiful and more stable.
The paper feeder has the function of non-stop paper feeding, saving time and increasing production capacity.
The equipment adopts servo edge lamination, which is more accurate and stable.
Powder removal device (optional) to achieve better laminating effect.
Chrome-plated roller gluing is adopted, with high accuracy <0.008mm, saving glue.
Strong hot air drying system is adopted to achieve rapid drying.
The hot pressing roller adopts electromagnetic heating, and the temperature is more uniform;
it achieves higher laminating quality.
Equipped with electric hydraulic pressure structure.
The electrical appliances adopt centralized control systems of brands such as Omron, which are highly safe.
The film change is equipped with a hydraulic film-loading vehicle, which is more convenient and faster.
More humanized design, easy to operate.
AFTER-SALES SERVICE COMMITMENT
1. The debugging of the machine shall be the responsibility of our company or the after-sales service agency authorized by Party A.
After the machine arrives at the end user, the user shall be responsible for the installation and commissioning, and shall provide
auxiliary materials, power supply and experienced personnel to assist Party A in the debugging work according to relevant conditions.
2. The qualified standard for installation and commissioning is that the user shall issue a qualified certificate of installation and
commissioning to our personnel.
3. Our company will provide skill training or on-site operation training for your operators, and the training time is stipulated to be 3
days. If training services are required again after the training, the time and cost shall be negotiated by both parties.
4. From the date of acceptance, this equipment shall be unconditionally returned within seven days if there are major quality
problems, and free on-site repair with one-year product quality guarantee, except for wearing parts. The cost of replacing spare parts
caused by failures or damages caused by human factors or irresistible natural phenomena shall be borne by the customer.
5. For quality problems caused by normal use of the equipment that are not caused by human factors, we will provide timely services
including telephone, WeChat, video, door-to-door service within 24 hours after receiving the repair notice from the customer until the
problem is solved. Our company also provides a one-year warranty period after installation and commissioning, including spare parts
(except for wearing parts); we will give the customer a clear solution within 1 working day. The two parties can negotiate the time for
after-sales service personnel to be in place, but our service personnel should arrive at the customer's designated service location
within 48 hours. If the equipment fails or is damaged due to human factors during the warranty period, the company will charge
material and labor costs, and paid lifetime service will be implemented after the warranty period expires.
